Vinyl Transfer

A double set of Buffalo 5-inch roundel stickers—one for the left and one for the right.

REMEMBER THE BUFFALO ALWAYS FACES FORWARD!

How It Works

Three-Layer Design:

1. Backing Paper: This is the base layer that protects the adhesive side of the vinyl sticker.
2. Vinyl Sticker: The actual design or text cut from durable vinyl.
3. Transfer Tape: A clear or semi-transparent top layer that holds the vinyl sticker in place during application.

Application Process:

1. Prepare the Surface: Clean and dry the area where you want to apply the sticker.
2. Peel Off the Backing Paper: Carefully remove the backing paper, leaving the vinyl sticker attached to the transfer tape.
3. Position the Sticker: Align and place the sticker onto the desired surface with the transfer tape facing up.
4. Press and Smooth: Firmly press down on the transfer tape with a squeegee or a credit card, smoothing out any bubbles and ensuring the vinyl sticks to the surface.
5. Remove the Transfer Tape: Slowly peel away the transfer tape, leaving only the vinyl sticker perfectly applied to the surface.